Simon Keller Steri 250 - Glass Bead Sterilizer

  Designed to sterilize small to medium sized instruments. The Simon Keller glass bead sterilizer maintains a constant 482° F (250° C) guaranteeing destruction of pathogens and microbial contaminants.  

Simply place your instruments in the Steri-glass beads for at least 10 seconds to attain full sterilization.

[_] Available in 110/120V (American)
[_] 14.5 X 12.5 X 13.5cm
[_] 8cm Well Depth

Instructions:
Fill sterilizer well with glass beads provided within 3 mm below rim.  Insert electrical plug into wall socket.  DO NOT cover well with lid.  Switch unit on.  It will take 15-20 minutes to reach operating temperature.  Carefully insert the working part of the clean instrument into well after unit has reached operating temperature and leave for 10-20 seconds.  Do not leave longer as instruments become too hot to handle.  Sterilization is on contact with glass beads.  Unit can be left in the 'ON' position all day and is safe for use in Laminar flow cabinets.  Only when unit is switched off and cool, cover with lid to reduce dust accumulation.  Do no cover with lip when unit is hot.  Should unit overhead and trip a safety switch, let it cool off completely, then turn it over and push in the red button visible inside the unit as viewed through one of the cooling holes.  

The glass beads should be cleaned routinely (soap and hot water) and replaced in a dry state.

Manufacturers Specifications: Sterilizers